壓縮空氣干燥器各種工業和商業設施。單塔空氣干燥器,YKG-2G,YKG-F型干燥器樹脂拉鏈可使用在各類場所，一種用于去除壓縮空氣中水蒸汽的設備。但一般比較喜歡用在服裝的口袋上。常用的拉鏈頭是噴漆的有時也使用電鍍的樹脂拉鏈是以共聚甲醛為主資料，本錢在尼龍拉鏈和金屬拉鏈中間的一種，該類拉鏈耐用性要比金屬拉鏈和尼龍拉鏈好。壓縮的空氣中過多的水，無論是液體或蒸氣階段，可能會給用戶操作帶來的各種各樣的問題。包括凍結室外空氣管路，加速設備腐蝕速度和造成產品污染。壓縮空氣干燥器有各種各樣的類型，性能特征通常是由露點來定義的通過"壓力變化"變壓吸附原理）來達到干燥效果。

 

Compressed air dryer various industrial and commercial facilities. Single tower air dryer, YKG-2G, YKG-F resin zipper dryer can be used in various places, a device for removing water vapor in compressed air. But they usually prefer to be used in the pockets of clothes. The commonly used zippers are painted and sometimes electroplated resin zippers, which are based on copolymer formaldehyde. The cost is between nylon zippers and metal zippers. The durability of these zippers is better than that of metal zippers and nylon zippers. Excessive water in compressed air, whether in liquid or vapor phase, may cause a variety of problems for user operation. It includes freezing outdoor air pipeline, accelerating equipment corrosion speed and causing product pollution. Compressed air dryer has a variety of types, performance characteristics are usually defined by dew point through the "pressure change" pressure swing adsorption principle to achieve drying effect.

 

由于氣體容納水汽的能力與壓力成正比，其干燥后的一部分氣體（稱為再生氣）減壓膨脹至大氣壓，這種壓力變化使膨脹氣體變得更干燥，然后讓它流過需再生的干燥劑層(采用顆?；钚蕴嘉剑┘匆盐兆銐蛩母稍锼└稍锏脑偕鷼馕龈稍飫├锏乃?，將其帶出干燥器來達到脫濕的目的兩塔循環工作，無需熱源，連續向用戶用氣系統提供干燥氣。為化工、輕工、電訊、石油、紡織等行業的氣動控制、氣動儀表、氣動元件以及各工業中的工業用氣提供干燥的壓縮空氣氣源，具有體積小，工藝流程簡單，投資省，使用維修方便，自動控制，節約能源等特點。

 

Because the capacity of the gas to hold water vapor is proportional to the pressure, a part of the gas (called regenerated gas) after drying expands to atmospheric pressure. This pressure change makes the expanded gas drier, and then dries it through the drying agent layer that needs regeneration (using particulate activated carbon adsorption), that is, the drying tower that has absorbed enough water vapor). Dry regeneration gas absorbs the moisture in the desiccant and takes it out of the dryer to achieve the purpose of dehumidification. The two towers circulate without heat source and continuously provide dry gas to the user's gas system. It provides dry compressed air source for pneumatic control, pneumatic instrumentation, pneumatic components and industrial gas in chemical, light industry, telecommunications, petroleum and textile industries. It has the characteristics of small size, simple process flow, low investment, convenient use and maintenance, automatic control and energy saving.